The Fiat Fiorino Dimensions cover the smallest of the Fiat professional range and has been around in one form or another since 1977. In this article we take a look at the key dimensions that can help you decide if its the right vehicle for you.
Fiat Fiorino Load Length
The Fiat Fiorino has just one wheelbase measuring 2513mm and this allows for a maximum cargo load length of 1523mm which is reduced subject to bulkhead intrusion. If that’s not enough, then the Fiorino has a handy little trick of allowing the passenger seat to be folded forward which increases the load length to 2491mm.
Fiat Fiorino Load Height
The van has a maximum load height of 1205mm and the load height is 527mm, which is measured from the ground to the floor of the cargo area.
Fiorino Door Sizes
The side load door on the Fiorino has a maximum width of 644mm at the top but this does not allow for any bulkhead intrusion. At the bottom just before the bulkhead starts to intrude this reduces to 570mm and the door height is 1041mm. The rear doors are 1140mm wide at their maximum and 1056 at their narrowest, the door height is 1040mm to 1060mm depending on where its measured.
The load cargo area is 2.5 cubic metre and once the passenger seat is folded down this increases to 2.8 cubic metres. The maximum width is 1473mm and in between the wheel arches is 1046mm which allows a metric or euro pallet to be loaded lengthways, assuming no thick ply lining is used.
Fiorino Overall Dimensions
The Fiorino has only one wheelbase measuring 2513mm and the overall length of the van is 3957mm with a width of 1716mm. Unfortunately they don’t say whether this is with or without the door mirrors and the overall height is 1721mm